Description
Steel band reinforced corrugated
pipe*36inch*ID885*OD945*SN8
HDPE Corrugated Spiral Pipes is described as the world’s best drainage pipe. They are constructed with Corrugated pipes wrapped in three layers to add extra support. These pipes share all the features share provided by commercially available plastic tubes coupled with the added strength and resistance provided by metal reinforcement . Used for many years in Europe this advanced technology with its economical and environmental advantages is now commercially available in Canada. The inner surface of the HDPE Corrugated Spiral Pipes are smooth while the outer surface is contoured. The metal layer provides extra strength to the profile of a HDPE Corrugated Spiral Pipe.
Corrugated Metal Reinforced Spiral Wrap has based its feature and function of each floor in the HDPE Corrugated Spiral Pipes. Corrugated Spiral Pipes, smooth inner surfaces and corrugated outer surfaces.
The structure of the three layers is as follows;
1. Inner Layer: The inside layer of the HDPE Corrugated Spiral Pipes. Fluid passes through the liquid layer. High Density Polyethylene (HDPE) are produced from the material.
2. Middle Layer: this section is the section which provides the strength property pipe. Given special profile shape steel strips previously coated with adhesive material used.
3. Outer Layer: The outside of the pipe is protected against all kinds of parts for printing and strength.
2mm thick high density polyethylene (HDPE) made while using material. In relation to the effect of UV rays from sunlight is not affected by participating in the carbon black.
Shrink Sleeve Method of HDPE Corrugated Spiral Pipes
This method is provided to seal the joints made by and used in the pipes is less than 1000 mm. Shrink sleeve is passed to the junction of two pipes and provides pipe coating is heated with the heater.
Reviews
There are no reviews yet.